Electrolux ERT14001W8 Notice D'utilisation page 23

3. Unscrew both adjustable feet.
4. Unscrew the screws of the door bottom
hinge. Remove the hinge. Put over the
pin in the direction of the arrow.
5. Unscrew and install the screw on the op-
posite side.
6. Install the hinge on the opposite side.
7. Screw both adjustable feet.
8. Unscrew both screws on the rear side.
9. Push back the top and lift it from the fix-
ing elements.
10. Unscrew the screws of the door top
hinge.
11. Remove the hinge. Put over the pin in the
direction of the arrow. Install the hinge on
the opposite side.
12. Tighten the hinge.
13. Put the top in position.
10) If foreseen
14. Pull it forward.
15. Screw both screws on the rear side.
16. Remove and install the handle
opposite side.
17. Reposition, level the appliance, wait for
at least four hours and then connect it to
the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Win-
ter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fit-
ting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the re-
versibility of the doors at your cost.
electrolux 23
10)
on the