Télécharger Imprimer la page

GLOBBER GO BIKE Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Keep the instructions for future reference.
NF-EN-71
Warning! Protective equipment should be worn. Not to be used in
traffic.
Please carefully read the instructions before assembly and use
the toy.
Be careful when unpacking and assembling the product.
This toy must be assembled by a responsible adult.
Remove all the parts which are not necessary for play before
giving the toy to your child.
General instructions of use
• Prior to use, make sure that the toy has been assembled
properly. Check the GO BIKE before the child rides to determine
if there are any potentially hazardous parts or conditions.
• Children should be supervised by adult while riding this GO BIKE.
Special care should be taken to instruct children in safe riding.
• Do not use on the public highways, examples of safe riding
area: To be used on flat and no gravel areas (playground, Public
Square)
• Do not use this toy near a staircase, on a slope, on a road or on
a wet surface.
• More mobility child grows, the more potential hazards increase.
At home, be sure to remove frames or mirrors hung too low and
could break, and any object that could fall in the event of impact.
Corner table can also be a danger.
• Do not allow more than one rider on the GO BIKE at
a time.
• Be sure the child wears clothes and appropriate footwear when
using GO BIKE.
8
• Be sure the rider keeps both hands on the handlebars for proper
control.
• Do not allow the rider to wear anything that obstructs hearing and
visibility or which impairs the functioning of GO BIKE.
• The toy should be used with caution since skill is required to
avoid falls or collisions causing injury to the user or third parties.
• Always wear safety equipment (helmet, elbow-pads, knee-pads).
Assembling the product (See page 3-5)
The balance bike is packed with the knobs already fixed on the
product directly in the box, meaning you will first have to unscrew
the knobs to insert the saddle tube and the end cap.
This product can have 2 different installation methods:
- low frame for a younger child.
- high frame with a higher saddle height for an older child.

Publicité

loading