Technoline 35.1078.10.IT Manuel D'instructions page 36

Outdoor transmitter identification number
Outdoor temperature
in °C/ °F
TOGGLING AND RESETTING THE OUTDOOR DATA
To toggle between the outdoor current, MAX/MIN temperature and humidity
1.
data and the times (for temperature data only) they were recorded press
the OUT/+ key:
Once to show the MAX outdoor temperature and humidity data with the
recorded time and date.
Twice to show the MIN outdoor temperature and humidity data with the
recorded time and date.
Three times to return to the current displayed values.
2. Once the MIN or MAX data is displayed, press and hold the SET key for 3
seconds to reset the respective MIN or MAX record to current temperature
and humidity data, and current time, date display.
Note: The MIN or MAX data needs to be reset individually.
TO VIEW THE MIN/MAX DATA FROM DIFFERENT TRANSMITTERS
When more than 1 transmitter used:
1. To toggle between transmitters, press the CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
2. Use OUT/+ key to view the MIN/MAX temperature and humidity data for
the selected transmitter.
3. To reset the minimum and maximum temperature and humidity data, and
the times at which they were recorded, press the SET key continuously for
about 3 seconds. This will reset the MIN/MAX data recorded to the current
time, date, temperature and humidity. The current time taken is the normal
displayed time and does not regard the time zone set for the unit.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
ABOUT THE OUTDOOR TRANSMITTER
The range of the thermo-hygro transmitter may be affected by the temperature.
At cold temperatures the transmitting distance may be decreased. Please bear
this in mind when positioning the transmitters. Also the batteries may be reduced
in power for the thermo-hygro transmitter.
35
MIN icon
Outdoor relative
humidity in RH%