OPERATION
Motor Speed Control
Slide to increase or decrease the power
of the motor (Fig. 1).
Carrying the Vacuum
To safely transport your vacuum,
especially when carrying the vacuum
up and down stairs, use the Carry
Handle located at the top of the bag
compartment (Fig. 2).
Power Cord Management
Pull the cord out of the vacuum to the
desired length. Do not pull the cord out
past the yellow safety tape.
Insert the cord into the cord catch to
lock it into place (Fig. 3).
To retract the cord, remove it from the
cord catch and tug on the cord until it
retracts into the vacuum.
Storage
The tab on the end of the wand or the
neck of the floor tool can be inserted
into either groove on the back or on the
bottom of the canister for easy storage
(Fig. 4).
6
Fig. 1
Fig. 2
Fig. 3
Fig. 4