Riccar Prima R50SS Manuel Du Propriétaire page 20

OPERATION OF THE FULL SIZE POWER NOZZLE
Carpet Height Adjustment Tips:
When using the power nozzle, start on
the "Auto" setting. If pushing the power
nozzle feels difficult, then adjust to a
higher setting. If the power nozzle feels
very easy to push, you may want to lower
the power nozzle for more effective cleaning.
The "Auto" setting is the recommended
setting for hard floor surfaces (i.e. tile,
vinyl, wood).
Warning Light
Your power nozzle is equipped with a
circuit breaker safety system that protects
it from a jammed situation. Items that
cause jammed brushrolls include socks,
excessive threads and corners of area
rugs. The warning indicator light on top
of the unit will change from green to red
should this condition occur (Fig. 1).
If the circuit breaker trips:
• Turn off the vacuum cleaner and power
nozzle then unplug the power cord.
• Remove the object preventing the
brushroll from turning.
• Locate the circuit breaker switch on
the back of the power nozzle and
press it to reset the breaker (Fig. 2).
When the unit is turned back on, the
warning light should be green.
If the breaker trips again, repeat these
steps again to correct the problem If
this does not correct the problem, contact
an Authorized Riccar Retailer for
further assistance.
18
Fig. 1
Fig. 2