Replacing The Squeegee - Riccar Prima R50SS Manuel Du Propriétaire

MAINTENANCE OF THE TANDEM AIR
POWER NOZZLE

Replacing the Squeegee

WARNING!
To Reduce the Risk of
Electrical Shock or Injury from Moving
Parts, Turn the Vacuum Off and Unplug it.
This power nozzle is equipped with a
squeegee on the bottom to improve its
effectiveness in cleaning bare floors.
If the squeegee splits or begins to look
worn, simply slide the worn squeegee
from its track and slide a new one into
Fig. 1
the track (Fig. 1). If you have trouble
installing the new squeegee, contact
an Authorized Riccar Retailer for
further assistance.
Removing the Bottom Plate
Turn the power nozzle over. Turn the two
screws 1/4 turn (Fig. 2) to release the
bottom plate. Lift off the bottom plate.
Replacing the Bottom Plate
Line up the hinges on the bottom plate
Fig. 2
then press the plate into position. Replace
the two screws and turn 1/4 turn to tighten.
15