Assembling The Vacuum; Attaching The Hose To The Vacuum; Attaching The Wand To The Hose; Attaching The Tool Caddy To The Hose - Riccar Prima R50SS Manuel Du Propriétaire

ASSEMBLING THE VACUUM

Attaching the Hose to the Vacuum

NOTE:
Do not plug in the vacuum until
it is completely assembled.
Push the hose inlet into the canister body
until it clicks into place. (Fig. 1)
To remove the hose from the canister
body, press the buttons on the hose inlet
and pull it away from the canister (Fig. 1).

Attaching the Wand to the Hose

Push the hose handle into the top of the
Fig 1.
wand until it clicks into place (Fig. 2).
Attaching the Tool Caddy to
the Hose
Attach the tool caddy to the hose by
lifting up on the tool clip and sliding
the tool caddy down until it clicks into
place. Attach any of the cleaning tools
to the caddy (Fig. 3).
Fig. 2
Fig. 3
5