Preparation - Velleman CAMCOLI5 Mode D'emploi

Caméra d'inspection avec écran couleur lcd
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Avoid strong mechanical strains or vibrations. The bending radius of the gooseneck must be at least
6 cm.
Clean the CAMCOLI5 after each use.
Do not use when visible damage to the device is noticed.
4.
Features
ideal for checking hard-to-reach areas, e.g. behind walls, suspended ceilings, etc.
4 built-in white LEDs
adjustable LED intensity
video and picture recording
records images on SD card (not incl.)
comes with: 3 exchangeable top-pieces
magnetic top: to pick up small metal pieces
o
hook: to retract wires or other small object
o
mirror: to look behind corners or in shallow holes.
o
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
power button
2
gooseneck (± 85 cm)
3
camera head with LEDs
4
gooseneck connector
5
control buttons
6
LED brightness control
7
handle
8
handle release button
6.

Preparation

Mounting the Gooseneck
1. Place the gooseneck [2] on the gooseneck connector [4], making sure that the pins are properly
aligned.
2. Gently push gooseneck and connector together, then turn the nut clockwise all the way to secure the
gooseneck [2].
Attaching or Detaching the Handle
To detach the handle [7] from the display unit, press the release button [8] and slide the handle
down and to the right to release.
To attach the handle back to the display unit, press the release button and click the handle into
place.
Placing the Display Unit Upright
1. Detach the display stand [15] from the back of the display unit.
2. Slot one end of the stand into one of the grooves at the back of the display unit.
You can now position the display unit upright.
Inserting the SD Card
1. Lift the cover from the SD card slot [10].
2. Insert an SD card (not included) in the card slot. Push it in until it clicks into place. The SD icon
appears on the display.
3. Place the cover back to protect the slot.
4. To remove the SD card again, lift the cover and push the card gently so that it pops out. Place the
cover back to protect the slot.
V. 01 – 06/09/2012
CAMCOLI5
9
USB plug
10
SD card slot (max. capacity 32 GB)
11
video output connector
12
power adapter connector
13
display
14
accessory tools: hook, magnet, mirror
15
display unit stand
4
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières