Before You Begin - U.S.Robotics USR997931A Guide D'installation

Before You Begin

Note: For more information, you can also refer to the Support section of the USRobotics
Web site: www.usr.com/support
Note: Your model number is 7931A. It is important that you have your serial number
written down before you install the 10/100/1000 Mbps 24-Port Switch. You can find your
serial number on the bottom label of the switch and on the side of the package. If you
ever need to call our Technical Support department, you will need this number to receive
assistance.
Step 1. Connect the power cord for your country to the 100-240VAC port on
the switch, then plug the power cord into a standard power outlet.
Step 2. Connect your 10/100/1000 Mbps 24-Port Switch to your Ethernet-
ready device.
Congratulations!
The installation of your U.S.Robotics 10/100/1000 Mbps 24-Port Switch is
complete. As connections are established with the 10/100/1000 Mbps 24-Port Switch, the
corresponding LED lights will turn on. Repeat this step as needed for up to twenty-three
additional devices.
2
9 10 11 12
1 2 3 4 5 6 7 8 USRobotics
LNK/ACT 10/100/1000 Mbps
FDX/COL 24-Port Switch
LNK/ACT
FDX/COL
13 14 15 16 17 18 19 20 21 22 23 24
100-240VAC