Introduction
Operating Environment
PC Specification Requirements
OS
: Windows XP (Professional or
Home Edition) (SP2)
CPU
: Pentium4 1.5 GHz (or higher)
Memory
: 1 GB and above
Hard disk space : Free space of 20 MB and
above
Video card
: 1024
True Color (24 or 32 bits)
Web browser
: Internet Explorer Version 6.0
LAN Environment
● 10BASE-T/100BASE-TX network
interconnected using an IEEE802.3-
compliant switching hub.
● IEEE802.3af-compliant switching hub when
PoE is in use.
● IGMPv2-compliant network when multicast is
in use.
Memo :
● The above PC specifications are merely
guides for smooth use of the applications,
and not a guarantee of their operation.
● Depending on the condition of use,
applications may not run smoothly even
when the user's computer meets the
specification requirements.
E-8
768 pixels or higher,
Cautionary Notes
Maintenance and operating
environment
This camera is intended for use indoors. It
cannot be used outdoors.
Do not store in the following environments.
It might result in malfunctions or failure.
● Hot or cold locations beyond the
surrounding temperature range of -10I to
50I.
● Locations beyond the allowable operating
humidity range of 35 % RH to 85 % RH.
(condensation is not allowed)
● Near equipment that produces strong
magnetic fields, such as transformers or
motors.
● Near equipment that emits radio waves,
such as transceivers and mobile phones.
● Locations with excessive dust and sand.
● Locations that are subject to excessive
vibration.
● Locations prone to moisture such as
window side.
● Locations subject to steam or oil, such as
kitchens.
● Locations that emit radiation, X-rays or
corrosive gases.
Use of this product and cables connected to
this product at locations where strong electric
waves and magnetic waves are generated
(e.g., near radio, TV, transformer, monitor,
etc.) may cause noise interferences in the
images or changes in the color.
Do not install at locations where cold air is
circulated, such as near the air vent of an air
conditioner. The drastic change in
temperature may fog up the dome cover.
Do not install at locations that may trap heat.
This product also discharges heat from the
surface of the main unit. As such, do not
install it at locations that may trap heat, such
as wall corners.
Handling of Equipment
Do not block vents around the equipment.
Inadequate heat ventilation may result in
malfunction of this product. Be sure not to
block vents around the product.