Image Adjustment; Mounting The Dome Cover - JVC VN-C215V4U Guide Rapide

Mounting
1.
Face the imaging direction mark (j) in the
shooting direction and mount the camera.
2.
Secure the camera in 3 locations.
A
Use a cross slot screw driver to push the
screw head of the ceiling mounting bracket
right in.
B
While holding onto the screwdriver, turn it
approximately 90 degrees in the clockwise
direction. Pull out the screwdriver when it
stops.
C
The ceiling mounting bracket is lodged on the
ceiling and the camera is secured.
Memo :
● To remove the camera, turn the screw head
of the ceiling mounting bracket (3 locations)
90 degrees in the anti-clockwise direction.
1
Towards the shooting direction
B
A
2

Image adjustment

When the camera is mounted, adjust the image
settings while looking at the actual image.
(A Pg.27 AImage adjustmentB)

Mounting the Dome Cover

After the image adjustment is completed, mount
the dome cover.
Installation is complete when the dome cover is
mounted.
(A Pg.29 AMounting the Dome CoverB)
E-19