Realwear HMT-1Z1 Mode D'emploi page 8

Turn on the HMT-1Z1
4 5 6 7
Press and hold the
power button for 3
seconds to turn on
the device.
Scan the Con guration QR Code from the HMT-1Z1
5 6 7
1. The HMT-1Z1 will automatically launch into con guration mode.
2. Point the camera at the QR code you generated in Step 1.
3. The HMT-1Z1 will detect the QR code and con gure the device.
Note: Once the device connects to WiFi an update of RealWear Device Agent may occur.
Say What You See
6 7 8
The HMT-1Z1 is controlled by voice and head motion.
Say what you see on the screen and move your head
to navigate. If you get stuck say Show Help.
Note: To change your language, press and hold the
action button on the side of the HMT-1Z1. The language
selection will switch automatically, let go of the button
when the language you want is selected.
8 9 10
8 9 10
9 10
Adjust display pod so you
can clearly see all 4 corners
of the display and then lock
into position using ring.