GB
Please read this instruction manual
time and comply with it.
Keep this instruction manual for
future reference or for subsequent
possessors.
Usage
The device is used properly if it is only used to
illuminate ordinary working areas and, in the process,
technical data. Any other or additional use is not
permitted.
The device may not be used:
• in areas with harmful gases, oils, acids,
radiation, etc.
• in areas with an explosion risk.
This device complies with all relevant norms and
standards required for CE compliance. Compliance
with these standards is no longer guaranteed when
Safety instructions
Do not cover the lamp.
■
Do not open the device.
■
There is a risk of short-circuit. Repairs
■
on the device may only be carried out by
commissioned and trai-ned persons.
Please contact your Würth branch.
Protect the battery against heat,
■
e. g., against continuous intense
re. Danger of explosion.
For your own safety
Always only use the charger recommended by
the manufacturer to charge the lamp. The use of a
destroy the lamp.
If the battery is damaged or not used
■
correctly;
•
vapours may leak and irritate the respiratory
system. Provide fresh air and contact a doctor in
the event of any discomfort.
•
make sure you get medical help.
•
there can be an internal short-circuit, the battery
may become overheated and explode or catch
Any damaged device or charger may no
longer be used and may be exchanged by
the manufacturer only.
The lamp may not be used in potentially explosive
■
areas.
Only stand the lamp on its head when it is swit-
■
The bulb of this lamp cannot be exchanged.
■
The whole lamp must be exchanged when the
bulb is defective.
-
Warning - Do not look directly into
the light emitting lamp - Risk of eye
injuries!
-
7