Maintenance And Environmental Protection - MeisterCraft MINITOOL MKB 160 E Traduction Du Manuel D'utilisation Original

5450620-Kleinbohrm-man 26.02.14 12:46 Seite 48
Steel and fibreglass brushes (Fig. 14)
• Steel: For cleaning metals and stone
• Fibreglass: For working non-ferrous
metals
Drill (Fig. 15)
For drilling small holes in watchmaking
and model building.
Diamond mounted point (Fig. 16)
For grinding and engraving hard
substances such as glass, ceramics,
porcelain and plastics. Diamond
mounted points are suitable for
engraving and chasing glass.
48
All manuals and user guides at all-guides.com
Milling points (Fig. 16)
For processing metals and plastics
wide variety of additional tools in
many sizes can also be purchased.
11 – Maintenance and
Clean the housing and drill chuck with a
damp cloth and then dry well. Do not
use solvents!
Noise reduction
The following factors may cause
excessive noise and can be corrected
by appropriate maintenance:
• dirty, bent or blunt insert tools,
• blocked air vents in the machine
• insecurely fastened machine parts.
work should not be disposed of in the
household waste! They are to be
collected separately, in accordance
with the 2012/19 EU directive for the
disposal of electrical and
electronic waste, and
sent for proper and
environmentally-friendly
recycling.
NOTE: Besides the tools
supplied with the machine, a
environmental
protection
CAUTION! Electrical and battery
operated units that no longer