Safety Instructions During Planing; Changing And Setting Of The Planer Knives - Robland SD410 Mode D'emploi

Safety instructions during planing

Check that all the knives are well placed and properly tightened.
If this is not the case, the knives will be thrown away from the machine with very serious
consequences for user and machine.
Always use the protective equipment provided on the machine.
The minimum height of a sharpened blade must be at least 20 mm.
Always wear tight clothing.
Even during short-term use of the machine, it is recommended to wear hearing protection. Prolonged
exposure to noise damages can lead to hearing loss.
Changing and setting of the planer
knives
(Fig.4)
Remove the knives by loosening the locking bolts (1).
Carefully clean the knives and the groove. Take care that the springs can move freely in the seats in
the arbor and are not blocked.
Insert the new knives using the supplied setting gauge (2) and tighten carefully.
Check that all bolts are tightened.
Fig.4
48
V0114 SD410 - S410
Nederlands Français English Deutsch