Aux Input Jack; Line Input Jack; Phones Jack - auna BlackMask Mode D'emploi

AUX INPUT JACK

1. Press the POWER button to turn on the unit.
2. Rotate SOURCE knob to select the Aux-In mode. 'Aux-In' will appear on
the LCD display.
3. Connect the AUX connect wire from the AUX out jack of your personal
player (e.g. portable MP3 player) to the AUX input jack.
4. Start playback from your personal player.

LINE INPUT JACK

1. Press the POWER button to turn on the unit.
2. Rotate SOURCE knob to select the Line-In mode. 'Line-In' will appear on
the LCD display.
3. Connect the Line in connect wire from the line out jack of your personal
player (e.g. portable MP3 player) to the Line input jack.
4. Start playback from your personal player.

PHONES JACK

1. Rotate the volume to set a low volume
2. Inset the headphones to the Phone jack.
Caution: Risk of hearing impairment
Set a low volume on the playback device before
connecting the headphones to the sound source.
Avoid excessive volume, particularly over extended
periods or frequent use.
EN
47