auna BlackMask Mode D'emploi page 32

EN
32
For wall mounting (stand removed)
It is important to be sure there are no electric, gas or water lines located
behind the wall where you are attaching the unit. We recommend having
this speaker professionally installed. Use the included wall mounting
accessories and template to attach the sound bar to the wall.
1. Use the supplied wall mounting instruction sheet to make marks on
the wall for the plastic anchors. Make sure the marks are level before
drilling.
2. Drill ¼" holes on the marks.
3. Insert the included plastic anchors into the holes until they are fl ush with
the wall.
4. Attach the 2 included spacer sleeves to the wall using the included
screws, and tighten the screws.
5. When the screws are tightened, the screw heads should be about ¼"
away from the spacer sleeves. Line up the keyhole slots located on the
back of the main unit with screws in the wall, see illustration below:
Spacer Sleeves
Screw
Wall plugs
plastic