Using as wired speakers :
1. Turn on one of the speakers.
2. Connect one end of the 3.5mm AUDIO cable to the AUDIO in jack on the back of the speaker and the other
end of the cable to an external device's headphone jack (Smartphone, Tablet, MP3 player).
3. Use the controls on your connected device to control music playback and volume.
Note : On some devices, if the volume is too low you can raise the volume on your device as well as the
speaker.
Connecting the audio cable will not override the Bluetooth™ mode. Be sure to turn off the Bluetooth™ or
unpair the device before using the « Audio In » feature. Only one speaker may be used if using the wired
feature.
Troubleshooting tips :
I can pair the Bluetooth speakers with Bluetooth enabled device, but I cannot hear any music.
1. Make sure your Bluetooth™ device supports A2DP profile.
2. Turn up the volume on your Bluetooth™ device.
3. You may have to un‐pair the speaker and re‐pair to your device.
I cannot get the Bluetooth speakers into pairing mode.
1. Make sure the Bluetooth speakers are turned OFF before beginning the pairing process.
2. A tone will sound, indicating that the speakers are in pairing mode, and the LED Bluetooth indicator light will
flash BLUE quickly.
3. The speakers are now in pairing mode.
My bluetooth device is not able to pair with the Bluetooth speakers.
1. Make sure the Bluetooth™ speakers are turned OFF before beginning the pairing process.
2. Keep your Bluetooth™ speakers and Bluetooth™ enabled device within 3 feet of each other during the
pairing process.
3. Check that YOUR device's Bluetooth™ feature is turned ON.
4. Try repeating the pairing process: See « pairing both speakers to one Bluetooth™ enabled device » or
« pairing both speakers separately to two Bluetooth™ enabled devices.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask
your local authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2015
FREESOUND‐ST
5