Adjusting The Volume - LOTRONIC LTC audio FREESOUND-ST Mode D'emploi

6. If required, enter the password « 0000 ». Select OK or YES to pair the speakers.
7. After a successful registration, the speaker will beep and the [
8. Speaker A is now connected to your first Bluetooth device.
Pairing the second speaker to a Bluetooth™ device :
1. Turn ON the second speaker (press and HOLD the [
2. The [ ] button will flash BLUE. The speaker is now in pairing mode.
3. Set your mobile phone or other Bluetooth enabled device to search/scan for Bluetooth devices.
4. When the Bluetooth enabled device finds the speakers, select FREESOUND‐ST from the list of found devices.
5. If required, enter the password « 0000 ». Select OK or YES to pair the speakers.
6. After a successful registration, the speaker will beep and the [
7. Speaker B is now connected to your first Bluetooth device.
Using your Bluetooth™ speakers :
Using the speakers together (both paired to once device) :
Note: This is when you have already paired both speakers to one device.
Powering ON:
1. Long press the [ ] button on both speakers for 3 seconds or until you hear a beep. You can do this
separately or at the same time.

Speaker A : the [

Speaker B : the [
2. Select FREESOUND‐ST from your device's Bluetooth list to reconnect them again.
Powering OFF:
1. Press the [ ] button on speakers for 3 seconds or until you hear a beep. The speakers will turn OFF.
Adjusting volume :
1. Press and HOLD the [
2. Press and HOLD the [
PLEASE NOTE. You can also adjust the volume from your connected device's volume control.
Playing Music :
To enjoy wireless music on your Bluetooth speakers, make sure you are connected to a Bluetooth enabled
device. Once connected, Press PLAY on your Bluetooth device. Once playback has begun you can control the
music from speaker(s) controls.
Note : If both speakers are connected to one device, you can control both speakers' music controls from one of
the speakers. For example, pressing [
Play/pause :
Quick press the [ ] button to pause the music. To resume music playback, quick press the
[ ] button again.
Skipping songs :
Quick press the [ ] button to slip the next song.
Quick press the [ ] button to go back to previous song.
Adjusting the Volume :
1. Press and HOLD the [
2. Press and HOLD the [
©Copyright LOTRONIC 2015
] button will flash BLUE quickly.
] button will stay a steady RED.
] button on speaker to decrease the volume.
] button on speaker to increase the volume.
] button on one speaker will increase the volume of both speakers.
] button on speaker to decrease the volume.
] button on speaker to increase the volume.
FREESOUND‐ST
] button will remain a steady BLUE.
] button for 3 seconds or until you hear beeps)/
] button will remain a steady BLUE.
4