BlueStork Ethernet RJ-45 200 Mbps Powerline TURBO Twin pack Manuel D'utilisation page 12

4. Hardware Connection – Internet
Follow the procedures describe below to connect the Ethernet
Powerline Adaptor to your ADSL broadband connection:
1. Power off your PC or Notebook.
2. Connect the provided Ethernet (RJ-45) cable to the
Ethernet Powerline Adaptor's Ethernet port.
3. Connect the other end of the Ethernet (RJ-45) cable to
an available Ethernet port of your ADSL broadband
Router.
4. Plug the Ethernet Powerline Adaptor into a wall socket
next to the computer.
5. Turn on your computer.
6. Check and confirm that the Power, Powerline and
Ethernet LEDs on the Ethernet Powerline Adaptor are
ON.
10