BlueStork Ethernet RJ-45 200 Mbps Powerline TURBO Twin pack Manuel D'utilisation page 11

3. Hardware Connection – Computer
Following are the steps to properly connect the Ethernet
Powerline Adaptor to your computer:
1. Power off your PC or Notebook.
2. Connect the provided Ethernet (RJ-45) cable to the
Ethernet Powerline Adaptor's Ethernet port.
3. Connect the other end of the Ethernet (RJ-45) cable to
you computer's LAN port.
4. Plug the Ethernet Powerline Adaptor into a wall socket
next to the computer.
5. Turn on your computer.
6. Check and confirm that the Power and Ethernet LEDs
on the Ethernet Powerline Adaptor are ON.
9