Astralpool VAP-2 Manuel D'installation Et D'emploi page 52

Fig. 7 Fig. 8
11.Once all of the components have been removed, remove all solid
residue from the bottom of the boiler.
WARNING, TO DO THIS OPERATION, PROTECT YOUR HAND WITH
APPROPRIATE GLOVES AND A MASK SO THAT YOU DO NOT INHALE
GASES FROM THE DELIMER. DO THIS OPERATION IN A WELL-
VENTILATED AREA.
12. With a decalcifier and a clean brush, clean all of the metal parts on the
boiler and all of its accesories as well as the inner pipe, the elbows and
dowels where they are attached, copper drain pipe, drain valve, level
controller, etc.
13. Once all of the generator components are clean, assemble the machine,
being careful to replace all of the sealing joint with new ones in order to
ensure maximum water-tightness of the apparatus.
14. Be sure that all of the wires are correctly connected and secured.
Remember when making the electrical line connection; always begin with
the grounding cable.
23