FireBird TWIX Mode D'emploi page 49

Zip security system
The slider of the zipper has to be secured on the trailing edge to avoid unvoluntary opening of the
zipper. At the same time the security system absorbs the tension of the trailing edge and therefore
relieves the zipper.
Velcro strap
Turn round ring
Flap of the slider
To secure the zipper pull the velcro strap first through the flap of the slider and then through the turn
round ring. Attach the velcro strap afterwards to the velcro security and secure it by wraping the velcro
around it. By pulling slightly on the trailing edge you can check if the security system works.
CAUTION: THE SLIDER OF THE ZIPPER MUST ALWAYS BE SECURED WITH THIS SECURITY
SYSTEM IF THE ZIPPER IS OPEN OR CLOSED.
Damages due to incorrect usage are not going to be replaced.
Slider
49
Velcro
security