Behringer DeepMind 6 Mode D'emploi page 34

34
DeepMind 6
DeepMind 6 Getting started
(EN) Step 3: Getting
started
OVERVIEW
This 'Getting Started Guide' will help you set up
the DeepMind 6 analog polyphonic synthesizer and
briefly introduce its capabilities.
CONNECTION
To connect the DeepMind 6 to your system
please consult the connection guide earlier in
this document.
BROWSING PROGRAMS
To change programs, use the -NO and +/YES
switches. To access the program browser press and
hold the PROG switch, then press the GLOBAL switch,
or move the rotary knob. For more information
on program management please consult the
product manual.
PROGRAMMING
The DeepMind 6 programming techniques are
described in detail in the product manual.
RECORD, EDIT and PLAYBACK AUTOMATION
When using the analog engine of the synthesizer
with a Digital Audio Workstation (DAW) you can
record and playback any automatable parameter.
This allows you to record expressive automation and
playback or edit that automation in your DAW.
USING AS A CONTROLLER
When using the synthesizer features as a controller
you can control your virtual instruments and
Digital Audio Workstation (DAW) with the
accurate touch and feel of a high quality keyboard,
1 rotary potentiometer, 26 slide faders, and 33
backlit switches. For mapping please consult the
product manual.
SOFTWARE SET-UP
The DeepMind 6 is a USB Class Compliant MIDI
device, and so no driver installation is required.
The DeepMind 6 does not require any additional
drivers to work with Windows, Android, MacOS and
iOS devices.
HARDWARE SETUP
Make all the connections in your system.
Apply power to the DeepMind 6 using the supplied
power cable only. Ensure your sound system is
turned down. Turn on the power switch.
DAW SETTINGS
In your DAW, create a new channel and select the
DeepMind 6 as the MIDI input device. On the same
channel ensure that recorded MIDI is also sent back
by making the DeepMind 6 the same channel's MIDI
output device.
If you can't see the DeepMind 6 in your DAW channel
options please consult your DAW documentation
to ensure you have enabled the DeepMind 6 as a
MIDI device.
GLOBAL SETTINGS
The GLOBAL menus allow you to customize the
DeepMind 6 analog polyphonic synthesizer to
your specific workflow / requirements. For more
information on the GLOBAL settings, please consult
the product manual.
FIRMWARE UPDATE
Check that the latest firmware in your unit is up to
date (see the GLOBAL/SYSTEM SETTINGS menu of
the display). If not, then updating the firmware will
give you the latest enhancements. Visit our website
behringer.com, and download the latest firmware
from the DeepMind 6 analog polyphonic synthesizer
product page.
IMPORTANT NOTE: Updating the
firmware may affect your programs,
please ensure you make a full back
up. For detailed instructions please
consult the product manual.