Otu-8000 Ip Configuration; Otu-8000 Configuration Via The Web Interface; Configuring The Tcp/Ip Network - JDSU OTU-8000 Manuel De L'utilisateur

OTU-8000 IP configuration

OTU-8000 Configuration via
the Web Interface

Configuring the TCP/IP Network

NOTE
When the local session is finished, do not forget to press local again
during 3s in order return to the normal mode.
The OTU-8000 is setup in DHCP mode with a host name such as: otu-
8000e-xxxx (xxxx is the serial number)
NOTE
The serial number of the OTU-8000 can be found under the equip-
ment, on the rating plate, and onto the calibration certificate.
If you want to change this configuration
1 Select Configuration from the left menu and the tab Ethernet.
The OTU-8000 must be in local mode
2 Enter and modify all the necessary information.
This chapter provides details regarding the menu option Configura-
tion.
NOTE
The OTU-8000 configuration can be viewed by everyone.
It can be modified exclusively in Local mode.
Once logged in, the Configuration page opens to the Ethernet tab.
Fig. 41 TCP/IP Configuration
1 Enter or modify all necessary information:
– Hostname
– IP Address
– IP Sub-Mask
– IP Gateway
– Domain Name
– DNS Server address
User Manual 7OTU80050/01
Chapter 3 Installation of the OTU-8000
Configuring the OTU-8000
35