vds Q100 Manuel page 30

Funzione 14 –Final blow after limit switch 1 to 20
(tenths of a second)
Ÿ Hold the P3 until the display shows
Ÿ Press repeatedly P2 until
Ÿ Press P3, the display shows
Ÿ Set the time in tenths of a second
Ÿ Press the button P1 to increase and P2 to decrease the value. Ex.
Ÿ Press P3 for confirmation
If you want to quit the programming mode follow the procedure for ESC:
Press P2 (Forward) or P1 (Backward) until you see
Confirm pressing P3.
Funcion 15 – Function test enabling
Ÿ Hold the P3 until the display shows
Ÿ Press repeatedly P2 until
Ÿ Press P3, the display shows
Ÿ Set the time of start delay in second
Ÿ Press the button P1 to increase and P2 to decrease the value of the start. Ex.
Ÿ Press P3 for confirmation.
If you want to quit the programming mode follow the procedure for ESC:
Press P2 (Forward) or P1 (Backward) until you see ES
Confirm pressing P3.
Function 16 – Count Maneuvers.
Ÿ Hold the P3 until the display shows
Ÿ Press repeatedly P2 until
Ÿ Press P3 to view tens / units
Ÿ Press P2 for thousands / hundreds
Ÿ Press P2 for hundreds-thousands / tens-thousands
Ÿ Press P3 for confirmation.
If you want to quit the programming mode follow the procedure for ESC:
Press P2 (Forward) or P1 (Backward) until you see
Confirm pressing P3.
e release P3
appears on the display
.
= Disabled.
e release P3
appears on the display
.
= Disabled.
e release P3.
appears on the display
( . )
( . )