Factory Settings - vds Q100 Manuel

Function 05 – Opening frequency setting in Hz
Ÿ Hold the P3 until the display shows
Ÿ Press repeatedly P2 until
Ÿ Press P3 the display shows
Ÿ Press the button P1 to increase and P2 to decrease the value
Ÿ Press P3 for confirmation.
If you want to quit the programming mode follow the procedure for ESC:
Press P2 (Forward) or P1 (Backward) until you see
Confirm pressing P3.
Function 06 – Closing frequency setting in Hz
Ÿ Hold the P3 until the display shows
Ÿ Press repeatedly P2 until
Ÿ Press P3 the display shows
Ÿ Press the button P1 to increase and P2 to decrease the value
Ÿ Press P3 for confirmation.
If you want to quit the programming mode follow the procedure for ESC:
Press P2 (Forward) or P1 (Backward) until you see
Confirm pressing P3.
Note:

FACTORY SETTINGS

Opening speed frequency in Hz
Closing speed frequency in Hz
Opening in slow speed frequency in Hz
Closing in slow speed frequency in Hz
Function 07 – Opening slowing down frequency setting in Hz.
Ÿ Hold the P3 until the display shows
Ÿ Press repeatedly P2 until
Ÿ Press P3 the display shows
Ÿ Press the button P1 to increase and P2 to decrease the value
Ÿ Press P3 for confirmation.
If you want to quit the programming mode follow the procedure for ESC:
Press P2 (Forward) or P1 (Backward) until you see
Confirm pressing P3.
e release P3
appears on the display
.
equal to the frequency set.
e release P3
appears on the display
.
equal to the frequency set.
e release P3
appears on the display
.
equal to the frequency set.
Min/Max
PS
01 ÷ 99
50Hz
PS
01 ÷ 99
50Hz
PS
01 ÷ 99
25Hz
PS
01 ÷ 99
25Hz
Pre-Set
PF PL
25Hz 50Hz
PF PL
25Hz 50Hz
PF PL
15Hz 30Hz
PF PL
15Hz 30Hz