Bartscher 601.182 Notice De Montage page 6

3) Tilt the shelf slightly to the side and slide the upper
parts of the four posts on the corners through the
shelf until they are firmly seated.
4) After the four posts have been slid through the
respective openings on the corners of the shelf,
place the entire shelf body upright and push down
firmly on the bottom at the corners from above to
ensure that the shelf lies firmly on the plastic bars.
3. Additional assembly
5) Attach the plastic bars in the (next) desired shelf
height at the respective posts. Let the shelves
slide down from above over the posts onto the
plastic bars and press them down firmly again.
6) Repeat step 5) for the other shelves. It is
recommended to attach the upper shelves
at the height of the top groove of the post.
7) To adjust the height (for levelling), rotate the
feet on the bottom parts of the posts in and out.
Now the shelf has been completely assembled.
NOTE!
Using a rubber hammer can make the assembly considerably easier.
CAUTION!
Do not damage the shelf!
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 6 -
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120