Bartscher 601.182 Notice De Montage page 5

GB/UK
Technical data
Description
Article no.:
Construction:
Dimensions
W x D x H (mm):
Weight:
Load capacity:
Subject to technical changes!
Assembly
1. Assembly of the posts
1) All four posts consist of two parts and are screwed together with the help of the
connecting pieces with threads that should already have been screwed to one of the
two post parts. The upper part of the posts has a plastic cover at the top, the lower
part of the post can be levelled at the bottom. Screw together the two parts of the
post hand-screwed in a clockwise direction. Should it not be possible to screw the
two post parts together easily, then the two thread parts were not joined properly.
2. Attaching the floor shelf
2) Let the conical plastic bar snap into the grooves on
the post, with the small, tapered end of the plastic bar
pointing up. The height of the posts can be adjusted by
approx. 2.5 cm respectively, during which the thicker
end of the conical bar should point downwards. It is
recommended, however, not to place the bottom shelf
higher than 15 cm above the floor.
Store shelf
601.182
4 lattice shelves
4 corner posts
910 x 460 x 1845
14,3 kg
200 kg,
load evenly
distributed
Wine rack
601.161
chrome-plated
5 lattice shelves
4 corner posts
900 x 350 x 1390
12,5 kg
100-130 bottles
Office shelf
601.151
4 lattice shelves
4 corner posts
750 x 350 x 1520
10,3 kg
150 kg,
load evenly
distributed
- 5 -