General Description; Appropriate Use - Lincoln 1400 Mode D'emploi

When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow Mainte-
nance Instructions may create a risk of shock
or injury.
Safety
Read and carefully observe these operating
instructions before unpacking and operating
PowerLuber. Operate PowerLuber only after
safety instructions and this operation manual
are fully understood.
Never operate PowerLuber in explosive at-
mosphere. Electric power tools can create
sparks which may ignite flammable liquids,
dust or fumes.
Do not use battery charger in damp or wet
locations.
Grease gun can develop high pressure - up
to 7,000 PSI (476 Bar). Use safety glasses
and gloves for protection during operation.
Keep hands clear of the exposed rubber
portion of hose.
Extreme pressure may cause nozzle
extension or whip hose to burst. Use only
Lincoln APPROVED hoses and follow
whip hose instructions and warnings.

General Description

The Lincoln PowerLuber is a fully battery
operational, automatic grease gun. The gun
was developed for manual lubrication of the
grease points and includes a circuit breaker
to stop motor at excessive pressure (7000
PSI or 476 Bar) in the case of a blocked
bearing, fitting or lubrication line.
The PowerLuber is driven by a small, low
voltage electric motor connected to a three-
stage planetary gear transmission. The
rotary motion of the motor is converted into
a reciprocating motion of the plunger using a
yoke mechanism. The PowerLuber is a posi-
tive displacement single acting pump.
Form 402103
Model 1400, 1440, 1442, 1442E, 1444, 1444E
PowerLuber Grease Gun

Appropriate use

The PowerLuber was exclusively designed to
pump and dispense lubricant using 14.4 volt
battery power.
The maximum specification ratings should not
be exceeded.
Any other use not in accordance with instruc-
tions will result in loss of claim for warranty or
liability.
Specifications
Basic PowerLuber Model 1400
Operating Power, Volt
Maximum Operating Pressure, PSIG (bar)
- Low Output -
- High Output -
Grease Reservoir Capacity, oz. (g)
Operating Temperature Range, °F (°C) 0 to 120
Operating Current, Amp
Lubricant (Grease)
Grease output oz./min. (gram/min)
- Low Output (L)
- High Output (H)
Weight, Lbs. (Kg)
Accessories:
Battery NiCd Model 1401
Output, VDC
Capacity, mAh
Battery Charger Model 1410
Charge time
Input, VAC (2.0 A)
Model 1410E (for use in Europe)
Input, VAC, (1.0 A)
Outlet Hose Model 1230
Pressure Rating, psi (Bar)
Length of the Hose, In (mm)
Hydraulic Coupler
Carying case model
ylene
NOTE: Operating current and grease output data at
1,000 PSI (69 bar).
Models and Components
Sales Model Basic PowerLuber Battery Charger Case
1440 1400
1442 1400
1442E 1400
1444 1400
1444E 1400
14.4
7,000 (476)
3,000 (204)
14.5 (411)
(-18 to +50)
4.0
Up to NLGI #2
3.8 (108)
8.5 (241)
8.0 (3.6)
14.4
1700
1 Hour
120 V, 60 Hz
220 V, 50 Hz
7,500 (510)
30 (760)
for grease fittings
material: Polyeth-
1401 1410 No
1401 1410 1402
1401 1410E 1402
1401(2) 1410 1402
1401(2) 1410E 1402
Page Number - 3