Starting A Wash Cycle; Changing The Program Mid Cycle - Danby DDW18D1EW Manuel Du Propriétaire

OPERATING INSTRUCTIONS
PROGRAMS AND OPTIONS TABLE
• The program duration may change according to the amount of dishes, the water temperature, the
ambient temperature and selected additional functions.
• The energy usage label is based on the regular program. It is the most effi cient in terms of its combined
energy and water consumption at cleaning normally soiled dishes.
• Only use powder detergent for short programs.
• Short programs do not include drying.
Programs
1. Regular Dirty
Clean
2. Auto Dirty
Clean
3. Intensive
4. Quick

STARTING A WASH CYCLE

1. Load the dishwasher as per the loading
instructions. Ensure that the upper and lower
arms can turn freely.
2. Add detergent and rinse aid as required.
3. Close the door and press the power button to
turn on the dishwasher.
4. Press the program button repeatedly until the
number of the desired program appears on the
display. Refer to the programs table above.
5. Press the extra button to add any desired
additional functions to the program.
6. Additional functions can be canceled by
pressing the extra button six times..
7. Press the start/pause button to begin the
program.
Duration Description
(minutes)
140 Standard program for daily, regular use to wash a normally soiled
105 load of dishes.
155 This program automatically adjusts the temperature, the quantity of
110 water, the energy consumption and the program duration.
130 Suitable for heavily soiled dishes.
50 Suitable for normally soiled daily dishes with a faster program.

CHANGING THE PROGRAM MID CYCLE

A program can only be changed if it has been
running for a short time, otherwise the detergent
may have already been released and the
dishwasher may have already drained the wash
water. If this is the case the dishwasher needs to be
reset and the detergent dispenser must be refi lled.
The program can be changed mid cycle by
following the steps below:
1. Press the start/pause button to pause the
program.
2. Press the program button to select the desired
program.
3. Press the start/pause button to start the new
program.
7