Product Setup - D-Link DUB-V310 Guide D'installation

PRODUCT SETUP

Step 1:
Plug the DUB-V310's USB Type-C connector into an available USB Type-C
port on your computer.
Step 2:
Connect a HDMI, VGA, or DisplayPort cable to the corresponding port on the
DUB-V310.
Step 3:
Attach the other end of the cable to the HDMI, VGA, or DisplayPort port of
your display.
Note:
• Regarding the Windows System: Supports different displays on 3 outputs simultaneously,
with HDMI 4K@30Hz, DisplayPort 4K@30Hz, and VGA 1080p@60Hz.
• Regarding the Mac System: All 3 outputs will show the same 1080p@60Hz picture/video that
is on the computer's display.
• You may need to set your computer's display to the secondary output only as some
computers only support output to 3 video streams.
• The resolution may automatically adjust for compatibility with each monitor when 2 or 3
monitors are connected.
Monitor
TECHNICAL SUPPORT
DUB-V310
Television Projector
Computer
eu.dlink.com/support
3