Stihl FSE 60 Notice D'emploi page 45

1
2
3
N
Hold the mowing head steady and
rotate the cap (1) counterclockwise
until it can be removed.
N
Pull the spool (2) out of the mowing
head (3) and remove the remaining
line.
FSE 60, FSE 71, FSE 81
Assembling the mowing head
4
2
N
Fit the empty spool in the mowing
head.
If the spring (4) has popped out,
N
push it into the spool (2) until it
engages in position with an audible
click.
N
Mount the mowing head – see
"Mounting the Cutting Attachment".
Winding Line onto Spool
3
2
3
5
N
Use green-coded nylon line with a
diameter of 2.0 mm.
N
Cut two 2 m lengths of line from the
replacement reel (special
accessory).
N
Rotate the spool (2)
counterclockwise until the two arrow
points are in alignment.
N
Push the straight end of each line
through one sleeve (5) in the
mowing head (3) until you feel a
noticeable resistance – and then
continue pushing as far as stop.
English
43