Operating Procedures; I Communications With Customers (Talk); I Communications With Other Store Personnel (Page) - Panasonic WX-T3020 Mode D'emploi

Operating Procedures

I Communications with
Customers (TALK)
Any store personnel wearing the headset can communicate
bidirectionally with any customer who is at the menu board.
1. Select a proper sound level by pressing the button
or .
2. You will hear a beep in the headset when a vehicle
arrives at the menu board.
<When the Press-To-Talk (PTT) mode is pre-
set>
1. Hold down the T1 button and speak to the customer.
A short beep is heard in the headset.
Hold down
2. Release the button. Your voice is not heard by the cus-
tomer.
Release
<When the Talk-Lock mode is preset>
1. Press the T1 button and speak to the customer.
A short beep is heard in the headset.
Press
2. Press the button again. The lock is released, and your
voice is not heard by the customer.
Press again
10
+ VOL –
I Communications with Other
Store Personnel (PAGE)
Store personnel wearing the headset can communicate with
each other without being heard by customers.
<When the Press-To-Page (PTP) mode is pre-
set>
1. Hold down the P button and speak into the microphone
of the headset at a normal level.
Hold down
2. Release the button. Your voice will not be heard by the
other store personnel.
Release
<When the Page-Lock mode is preset>
1. Press the P button and speak into the microphone of
the headset at a normal level.
Press
2. Press the P button again. The lock will be released, and
your voice will not be heard by the other store
personnel.
Press again
Note: Maintain a distance of more than 0.3 m {1 ft.} between
the headset and the Order Taker, or more than 1 m {3
ft.} between the headset and the center module.