Standalone Installation; Powering The Hub; Operation; Connecting Devices - Tripp-Lite U280-016-RM Manuel De L'utilisateur

Mounting and Installation

Standalone Installation

The U280-016-RM can be placed on any level
surface that can safely support its weight plus
the weight of the attached cables. When
installing on a desktop or other flat surface,
remove the backing material from the rubber
feet and affix them to the bottom panel at the
corners.

Powering the Hub

Insert the included power cord into the C14
inlet on the rear of the unit, then plug into a
power outlet.

Operation

Connecting Devices

Using a user-supplied or device manufacturer's
shielded USB cable, insert the USB A
connector into any of the U280-016-RM's
ports. Additional premium-quality USB cables
in various lengths and connector types are
available at tripplite.com.
Note: Both charge-only and charge/sync USB are
supported.
Note: A computer connection is not required when
only using the charging function.
14-03-280 93-3341.indb 4
4
6/9/2014 12:23:50 PM