Table des Matières
Publicité
TECHNICAL DATA
CORDLESS GARDEN BLOWER
Production code.........................................................................................................................
Rated input ................................................................................................................................
No-load speed
Level 1....................................................................................................................................
Level 2....................................................................................................................................
Level 3....................................................................................................................................
Air speed max.
Level 1....................................................................................................................................
Level 2....................................................................................................................................
Level 3....................................................................................................................................
Air flow rate
Level 1....................................................................................................................................
Level 2....................................................................................................................................
Level 3....................................................................................................................................
Battery voltage...........................................................................................................................
Weight according EPTA-Procedure 01/2014 (with Li-Ion Battery 3.0 Ah, 4.0 Ah) .....................
Weight according EPTA-Procedure 01/2014 (with Li-Ion Battery 9.0 Ah) .................................
Noise/vibration information
Measured values determined according to EN 50636-2-100 Annex CC.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level L
(at operators ear) ............................................................................
pA
Uncertainty K= .......................................................................................................................
Sound power level L
+K
....................................................................................................
WA
WA
Uncertainty K= .......................................................................................................................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 50636-2-100 Annex BB.
Handle Vibration .....................................................................................................................
Uncertainty K= .......................................................................................................................
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 50636-2-100
Annex BB and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
WARNING Read these instructions carefully, be familiar with
the controls and the proper use of the machine. Save all warnings
and instructions for future reference.
CORDLESS BLOWER SAFETY WARNINGS
Training
Read the instructions carefully. Be familiar with the controls and the
correct use of the machine.
Never allow children, persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge or people unfamiliar
with these instructions to use the machine, local regulations may
restrict the age of the operator.
Keep in mind, that the operator or user is responsible for accidents or
hazards occurring to other people or their property.
Preparation
Obtain ear protection and safety glasses. Wear them at all times while
operating the machine.
While operating the machine always wear substantial footwear and
long trousers. Do not operate the machine when barefoot or wearing
open sandals. Avoid wearing clothing that is loose fitting or that has
hanging cords or ties.
Do not wear loose clothing or jewellery that can be drawn into the air
inlet. Keep long hair away from the air inlets.
Operate the machine in a recommended position and only on a firm,
level surface.
Do not operate the machine on a paved or gravel surface where
ejected material could cause injury.
Never operate the machine while people, especially children, or pets
are nearby.
18
ENGLISH
M18 BBL
...........................4462 17 04...
...000001-999999
................................ 15 A
.......................... 18700 min
-1
.......................... 15300 min
-1
...........................11400 min
-1
............................. 42,8 km/h
............................. 32,2 km/h
............................. 26,7 km/h
............................... 2,9 m
/min
3
............................... 2,4 m
3
/min
............................... 1,8 m
/min
3
................................ 18 V
............................... 1,9 kg
............................... 2,2 kg
............................. 77,7 dB (A)
............................... 2,1 dB (A)
............................. 89,6 dB (A)
............................... 2,1 dB (A)
............................ ≤ 2,5 m/s
2
............................... 1,5 m/s
2
Operation
Always stand clear of the discharge zone when operating this machine.
If the machine becomes clogged, remove the battery before cleaning
debris.
Never operate the machine with defective guards or shields, or without
safety devices, for example debris collector in place.
Stop the machine, and remove the battery from the tool. Make sure
that all moving parts have come to a complete stop
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine.
The blower shall not be used for sucking!
Do not blow hot, flammable or explosive material.
Use the machine only in daylight or good artificial light.
Always be sure of your footing on slopes.
Never blow in the direction of bystanders. Do not operate without tubes
in place.
Walk, never run.
Keep all cooling air inlets clear of dirt.
Pay attention that bystanders are not injured through foreign objects
thrown from the machine.
Do not use for sucking liquids!
Do not overreach and keep your balance at all times.
Do not use in the rain or leave outdoors while it is raining.
Maintenance and storage
When the machine is stopped for servicing, inspection, or storage, or
to change an accessory, remove the battery and make sure that all
moving parts are come to a complete stop. Allow the machine to cool
before making any inspections, adjustments, etc. Maintain the machine
with care and keep it clean.
Store the machine in a dry place out of the reach of children.
Always allow the machine to cool before storing.
Do not modify this blower. Unauthorized modifications may impair the
safety of your product and may result in increased noise and vibration.
Keep all nuts, bolts and screws tight to be sure that the machine is in
safe working condition.
Examine the machine and replace worn or damaged parts for safety.
Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessorises.
Never attempt to override the interlocked feature of the guard.
Do not modify this blower. Unauthorized modifications may impair the
safety of your product and may result in increased noise and vibration.
ADDITIONAL SAFETY INSTRUCTIONS
Never allow children, persons with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge or people
unfamiliar with these instructions to use the
machine, local regulations may restrict the
age of the operator.
Remove the battery pack before starting
any work on the machine.
Do not dispose of used battery packs in the
household refuse or by burning them.
Milwaukee Distributors offer to retrieve old
batteries to protect our environment.
Do not store the battery pack together with
metal objects (short circuit risk).
Use only System M18 chargers for charging
System M18 battery packs. Do not use
battery packs from other systems.
Battery acid may leak from damaged
batteries under extreme load or extreme
temperatures. In case of contact with
battery acid wash it off immediately with
soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and
immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack or
charger in fluid or allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can cause a short circuit.
RESIDUAL RISK
Even when the product is used as
prescribed, it is still impossible to
completely eliminate certain residual risk
factors. The following hazards may arise in
use and the operator should pay special
attention to avoid the following:
• Injury caused by vibration
Hold the product by designated handles
and restrict working time and exposure.
• Exposure to noise can cause hearing
injury
Wear ear protection and limit exposure.
• Injury due to flying debris
Wear eye protection, heavy long
trousers, gloves and substancial
footwear at all times.
SPECIFIED CONDITIONS OF USE
The cordless blower is intended for blowing
of dirt and leaves.
Do not use this product in any other way as
stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the
product described under "Technical Data" fulfills all the relevant
regulations and the directives 2011/65/EU (RoHS), 2014/30/EU,
2006/42/EC, and the following harmonized standards have been used:
EN 60335-1:2012+AC:2014+A11:2014+A13:2017+A1:2019+A2:2019
+A14:2019
EN 50636-2-100:2014
EN 62233:2008
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 63000:2018
Measured sound power level: 89.6 dB(A)
Guaranteed sound power level: 92 dB(A).
Conformity assessment procedure according 2000/14/EC to Annex V.
Winnenden, 2020-12-16
Alexander Krug
Managing Director
Authorized to compile the technical file.
GB-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the
product described under "Technical Data" fulfills all the relevant
provisions of the following Regulations S.I. 2008/1597 (as amended),
S.I. 2016/1091 (as amended), S.I. 2012/3032 (as amended) and that
the following designated standards have been used:
BS EN 60335-1:2012+A13:2017
BS EN 50636-2-100:2014
BS EN 62233:2008
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015
BS EN IEC 63000:2018
Measured sound power level: 89.6 dB(A)
Guaranteed sound power level: 92 dB(A).
Conformity assessment procedure according to S.I. 2001/1701
Schedule 8.
ENGLISH
19
Publicité
Table des Matières
