Installation Steps; Package Contents - Axis P7214 Guide D'installation

AXIS P7214 Installation Guide
AXIS P7214 Video Encoder
This installation guide provides instructions for installing a AXIS P7214 video encoder on your
network. For other aspects of using the product, see the User Manual available at www.axis.com

Installation steps

Follow these steps to install the AXIS P7214 on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware. See page 6.
4. Access the video stream. See page 7.

Package contents

Item
Axis video encoder models
Power adapter models
Mounting kit
Printed Materials
Installation Guide
Models/variants/notes
AXIS P7214
Type PS-K
• 4 screws and 4 plugs to mount the encoder to a concrete wall
• 4 Surface protection pads
• Terminal block connectors (I/O: 6-pin connector, RS485/RS422:
2 x 2-pin connector)
AXIS P7214 Installation Guide (this document)
Page 5