5. Chemical Compatibility
As mentioned above, the Sartolab
Sartolab
-P20 Plus is designed for filtration
®
of aqueous solutions – not for organic sol-
vents, alcohols, acetone, surfactants (emul-
gators), strong acids or bases. For such pur-
poses, we recommend the Sartorius Stedim
Biotech Midisart 2000 units, containing a
PTFE membrane, order no. 17804E
6. Ordering Information
The units are available in various configura-
tions for Systems with Luer Lock Connec-
tors and Systems with Tubing: Sartolab units
with a luer lock inlet fit directly onto the
corresponding connectors of tubing from
diaphragm pumps or it can be used with
luer lock syringes.
Sartolab
-P20 and Sartolab
®
Ordering Information
Type Membrane Hous-
ing
Sartolab
-P20
®
SFCA
PC
SFCA
PC
PES
PC
Sartolab
-P20 Plus
®
SFCA + GF PC
SFCA + GF PC
PES + GF
PC
PES + GF
PC
GF*
PC
SFCA - Cellulose Acetate, PES - Polyethersulfone, GF - Glass Fiber Prefilter,
PC - Polycarbonate
*GF - Glass Fiber Filter only
-P20 |
®
-P20 Plus
®
Pore
Inlet
Size
0.2 µm
Hose Barb Hose Barb Yes
0.2 µm
Luer Lock Hose Barb Yes
0.2 µm
Luer Lock Hose Barb Yes
0.2 µm
Hose Barb Hose Barb Yes
0.2 µm
Luer Lock Hose Barb Yes
0.2 µm
Luer Lock Hose Barb Yes
0.45 µm Hose Barb Hose Barb No
n.a.
Luer Lock Hose Barb No
(0.45 µm pore size) or 17805E (0.2 µm pore
size).
In the interest of the further development
of Sartorius Stedim Biotech products, we
reserve the right to make changes to the
design or specifications without notice.
If the liquid to be filtered will be pumped
through open tubing from a pressure tank
or a diaphragm pump, then a Sartolab unit
with a hose nipple inlet is required. The
stepwise increase in diameter of the hose
nipple, from 6 mm to 12 mm, makes it suit-
able for a wide range of tubing. The order
numbers are listed below:
Outlet
Sterile Qty./
Order No.
Pkg.
10
18052----------D
10
18053----------D
10
18075----------D
10
18056----------D
10
18058----------D
10
18068----------D
100
18076----------N
10
18072----------D
| 7