Sartorius Sartolab-P20 Instructions D'utilisation page 5

Technical Specifications for Sartolab
with PES Membrane
Properties
Filter material
Housing material
Color code
Filter diameter
Connector inlet
Connector outlet
Filling bell
Filtration area
Hold-up volume
before bubble point
Housing burst
pressure
Bubble point
Max. recommend-
ed inlet pressure
Flow rate for water
Filtration range
pH-range
Non-specific
protein adsorption
Sterilization
Biosafety
Operating
instructions
-P20 and Sartolab
®
Sartolab -P20
®
18075
PES, type 15407 MI
0.2 µm pore size
Polycarbonate
Transparent
61 mm
Female luer lock or
stepped hose nipple
with 6 mm to 12 mm
outer diameter
Hose nipple
No
20 cm
2
1 ml
> 5 bar | 72.5 psi
≥ 3.2 bar | 46.4 psi
3 bar | 43.5 psi
≥ 400 ml/min at ∆p
= 1 bar | 14.5 psi
100 ml to max. 5 L
1 to 8
No loss of protein
detectable (filtration
of γ globulin, method
acc. to Bradford)
EO sterilization
Class VI Plastics Test
Directions for use
included in each box
-P20 Plus Units
®
Sartolab -P20 Plus
®
18076
PES, 0.45 µm pore
size plus GF, 100%
free of binding agents
Polycarbonate
Transparent
61 mm
Stepped hose nipple
with 6 mm to 12 mm
outer diameter
Hose nipple
No
20 cm
2
1 ml
> 5 bar | 72.5 psi
≥ 2.2 bar | 46.4 psi
3 bar | 43.5 psi
≥ 600 ml/min at ∆p
= 1 bar | 14.5 psi
100 ml to max. 5 L
1 to 8
No loss of protein
detectable (filtration
of γ globulin, method
acc. to Bradford)
–
–
Directions for use
included in each box
Sartolab -P20 Plus
®
18068
PES, type 15407 MI
0.2 µm pore size plus
GF, 100% free of bind-
ing agents and PTFE
Polycarbonate
Transparent
61 mm
Female luer lock or
stepped hose nipple
with 6 mm to 12 mm
outer diameter
Hose nipple
Yes
20 cm
2
Approx 1.5 ml
> 5 bar | 72.5 psi
≥ 3.2 bar | 46.4 psi
3 bar | 43.5 psi
≥ 400 ml/min at ∆p
= 1 bar | 14.5 psi
100 ml to max. 10 L
1 to 8
No loss of protein
detectable (filtration
of γ globulin, method
acc. to Bradford)
EO sterilization
Class VI Plastics Test
Directions for use
included in each box
| 5