EN
•
If an extension cord is used it must be
approved for outdoor use and the
cross-sectional area of the wires must be
dimensioned for the power supply to the
product. If an extension cord is used on a
reel, pull out the full length of cord.
–
Always check the extension cord for
damage, wear and ageing before use.
–
Replace the extension cord if it is
damaged or defective.
–
The use of damaged, defective or
unsuitable extension cords can result
in fire and/or electric shock.
SERVICE
•
Power tools must only be serviced by
qualified personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.
REDUCTION OF NOISE AND
VIBRATIONS
•
Plan the work so that exposure to heavy
vibrations is spread over a longer period.
•
To reduce noise and vibrations when in
use, limit the time the tool is in use, and
use low-power/vibration mode and
suitable safety equipment.
•
Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
–
Only use the tool in accordance with
these instructions.
–
Check that the tool is in good
condition.
–
Use accessories in good condition,
and which are suitable for the
purpose.
–
Keep a firm grip on the handles/grips.
–
Maintain and lubricate the tool in
accordance with these instructions.
32
SYMBOLS
Read the instructions.
Wear ear protection.
Wear safety glasses.
Approved in accordance with
the relevant EU directives.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage
Output
Cutting width
Weight
Sound pressure level, L p A 82.5 dB(A), K= 3 dB
Sound power level ¹, L w A
Sound power level ², L w A
Vibration level *
Vibration level **
1) Measured, 2) Guaranteed
* Front handle, ** Back handle
Always use ear protection!
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and for
a preliminary assessment of exposure.
230 V ~ 50 Hz
1400 W
190 mm
6.5 kg
93 dB(A), K= 3 dB
93 dB(A)
2.862 m/s²
2.728 m/s², K= 1.5 m/s²