Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: Improper operation or maintenance of
this product could result in serious injury and property
damage. Read and understand all warnings and
operating instructions before using this equipment.
When using air tools, basic safety precautions
should always be followed to reduce the risk of
personal injury.
Do not use damaged, frayed or deteriorated air
hoses and fittings.
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions
may be harmful to your hands and arms. Stop
using any tool if discomfort, tingling feeling
or pain occurs. Seek medical advice before
resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not
overreach when operating this tool.
Always wear hearing protection when operating
this tool.
Always wear ANSI Z87.1 CAN CSA Z94.3 eye
protection when operating or performing
maintenance on this tool.
6.2 Bars
(90 PSI/
Always turn off the air supply and disconnect
620 kPa)
the air supply hose before installing, removing
or adjusting any accessory on this tool, or before
6.2 Bars
(90 PSI/
620 kPa)
performing any maintenance on this tool.
6.2 Bars
(90 PSI/
620 kPa)
Operate at 90 PSI (6.2 Bar) Maximum
air pressure.
6.2 Bars
(90 PSI/
620 kPa)
WARNING:
•
Prevent unintentional starting. Ensure the trigger
is in the off position before connecting to air
source, picking up or carrying the tool. Carrying
power tools with your finger on the switch or
energizing power tools that have the switch on
invites accidents.
•
Do not operate this tool for long periods of time.
Vibration caused by tool action may be harmful
to your hands and arms. Stop using any tool if
discomfort, tingling feeling or pain occurs. Seek
medical advice before resuming use.
•
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the
hands of untrained users.
2
6.2 Bars
(90 PSI/
620 kPa)
6.2 Bars
(90 PSI/
620 kPa)
6.2 Bars
(90 PSI/
620 kPa)
•
Do not use oxygen or reactive gases; explosion
may occur.
•
Exceeding the maximum pressure of 90 PSI
(6.2 Bar) will lead to the risk of danger such as
excessive speed, tool wear, breaking parts, higher
torque or force that may destroy the tool and its
accessories or the part being worked on.
•
Read all manuals included with this product
carefully. Be thoroughly familiar with the controls
and the proper use of the equipment.
•
Only persons well acquainted with these rules
of safe operation should be allowed to use the
air tool.
•
Do not exceed any pressure rating of any
component in the system.
•
Disconnect the air tool from air supply before
changing tools or attachments and during
non‑operation.
•
Always wear safety glasses and ear protection
during operation. Always wear approved safety
glasses with shields. Always wear approved
hearing protection.
•
Do not wear loose fitting clothing or apparel
which contains loose straps or ties, etc. Which
could become entangled in moving parts of the
tool and results in serious personal injury.
•
Do not wear jewelry, watches, identifications,
bracelets, necklace, etc. When operating any tool,
they may become caught in moving parts and
result in serious injury.
•
Do not depress trigger when connecting the air
supply hose.
•
Always use attachments designed for use with air
powered impact tools.
•
Do not use the tool if it has been damaged.
•
Use rated accessories recommended by Mac Tools
only. Inspect accessories before use. Do not use
cracked or damaged accessories. Just because the
accessory can be attached to your power tool, it
does not assure safe operation.
•
Never trigger the tool when not applied to a work
object. Attachments must be securely attached.
Loose attachments can cause serious injury.
•
Protect air lines from damage or puncture.
•
Never point an air tool at oneself or any other
person. Serious injury could occur.
•
Check air hoses for weak or worn condition before
each use. Make sure all connections are secure.
•
Keep all nuts, bolts and screws tight and ensure
equipment is in safe working condition.
•
Keep hands and other body parts, loose clothing
and long hair away from the moving end of tool.
•
Accessories and tools can get hot during
operation. Wear gloves when touching them.
•
Do not discard the safety instructions; give them
to the operator.
Publicité
Table des Matières
