MSI G52-M6712XH Mode D'emploi page 11

other side of the clip. Connect the fan to the power supply connector provided on your mainboard.
MSI Reminds You...
Overheating
Overheating will seriously damage the CPU and system, always make sure the cooling fan can work
properly to protect the CPU from overheating.
Replacing the CPU
While replacing the CPU, always turn off the ATX power supply or unplug the power supply' s power
cord from grounded outlet first to ensure the safety of CPU.
Memory
The mainboard provides 3 slots for 184-pin DDR SDRAM DIMM (Double In-Line Memory Module)
modules and supports the memory size up to 3GB. Install at least one DIMM module on the slots.
Each DIMM slot supports up to a maximum size of 1GB. You can install either single- or double-sided
modules to meet your own needs.
Please refer to http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_list.php for
compatible DDR modules.
Installing DDR Modules
1. The DDR DIMM has only one notch on the center of module. The module will only fit in the right
orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the golden finger
on the memory module is deeply inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
7