NEC MultiSync A500+ Mode D'emploi page 7

Controls
OSM(On-Screen Manager) control buttons on the front of
the monitor function as follows:
EXIT
CONTROL </>
CONTROL -/+
PROCEED
RESET
ab Brightness/Contrast Controls
a BRIGHTNESS: Adjusts the overall image and background screen
brightness.
b CONTRAST: Adjusts the image brightness in relation to the
background.
de Size and Position Controls
h LEFT/RIGHT: Moves the image horizontally (left or right).
i DOWN/UP: Moves the image vertically (up or down).
f NARROW/WIDE: Decreases or increases the horizontal size of the
image.
g SHORT/TALL: Decreases or increases the vertical size of the
image.
pq Geometry Controls
The Geometry controls allow you to adjust the curvature or angle of
the sides of your display.
u IN/OUT (pincushion): Decreases or increases the curvature of
the sides either inward or outward.
r LEFT/RIGHT (pincushion balance): Decreases or increases the
curvature of the sides either to the left or right.
q TILT (parallelogram): Decreases or increases the tilt of the sides
either to the left or right.
p ALIGN (trapezoidal): Decreases or increases the bottom of the
screen to be the same as the top.
Exits the OSM menu.
Moves highlighted area left/right to select one of the
controls.
Moves the bar in the - or + direction to decrease or
increase the adjustment.
Enters OSM menu and selects icons at the top of the menu.
Resets the highlighted control to the factory setting.
E - 4