Setting the ventilation
• Exhaust ventilation: Turn the control knob to exhaust mode (Figure A). Install the
exhaust hose and switch on the cooker hood. The exhaust air is now discharged to
the outside.
• Recirculation ventilation: Turn the control knob to recirculation mode (Figure B).
Fasten the outlet covers and switch on the cooker hood. The air is now discharged
via the inner outlet.
OPERATION
• Press the Stop button and the motor stops.
• Press the Low button and the motor runs at low speed.
• Press the Medium button and the motor runs at medium speed.
• Press the High button and the motor runs at high speed.
• Press the Light button and the two lamps light up. Press the button again and the
light goes out.
Exhaust ventilation
Recirculation ventilation
EN
23