Assembly - Marshalltown Bullet BT92-2095 Mode D'emploi

E
D
Step 1 – Lay out all of the parts.
A. Carry Handle Assembly (1x)
B. Blade Receiver (1x)
C. Guide Fence (1x)
D. Guide Rods (2x)
E. M8-1.25 x 20 BHSCS Hex
Drive Screw (2x)
F. M8-1.25 x 16 Flat Head Hex
Drive Screw (2x)
G. 5mm Hex-Key Wrench (1x)
Step 3 – Attach Guide Rods (D) to the Carry
Handle (A) using Screws (E). Tighten Screws (E)
using Hex-Key Wrench (G).
6 of 16
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
A
E
B
C
F
F
G

ASSEMBLY

D
Step 2 - Insert Guide Rods (D) into holes on
side of Carry Handle (A) with the lip.
Step 4 – Slide Blade Receiver (B) onto Guide
Rods (D) so that the Latch Lever is facing you
and Carry Handle (A) is on the left.
WS2712