Maintenance - Marshalltown Bullet BT92-2095 Mode D'emploi

Step 6 – Center the Axle Pin using a
screwdriver or pen.
Clean all glue residue from the runners and blade cartridge with mineral spirits or similar
solvent before storing.
In humid areas, coat entire Vinyl Glider with WD-40 once a month to prevent corrosion.
WS2712
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
CHANGING THE BLADE
Axle Pin
Beveled end of
spacer facing out.
Blade
Flat end of spacer
facing blade.

MAINTENANCE

Step 5 - Slide the Blade and Spacers back into
the Blade Cartridge.
Step 7 - Turn the knob counterclockwise to
return the blade to scoring position.
13 of 16