Marshalltown Bullet BT92-2095 Mode D'emploi page 11

Step 11 – Press firmly down on knob (A) and
slide glider along the full length of your vinyl
plank.
a. If vinyl plank will not snap, extend blade
further by turning the adjustment knob a half
turn and slide the glider back along the vinyl
plank.
Step 13 – Starting at one end, flex the vinyl
plank up, then down - to snap it along the line.
Step 14 – Tips for stubborn planks:
a. Use duck billed pliers to snap narrow strips
b. Lean the scored plank against another (or against a small stack) with the score line suspended
parallel to the plank, then step on it to flex it. You may need to walk up the length of the plank as it
snaps along the score line.
WS2712
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
PRODUCT OPERATION
Step 12 - Slide the glider off the end of the
plank.
11 of 16