Installation; Modulator Operation And Configuration - FTE Maximal MODIG S Manuel De L'utilisateur

b. ◄► In edit setting mode use Left/Right buttons to select the parameter to
change the value.
c. ▲▼ Use Up/down button to change the value of the current parameter in
edition mode.
d. EXIT. Store the last edition operation or return to the operation mode.

4 Installation

Connect a HDMI cable from the HDMI output of the HD audio / video source to the input
HDMI IN of the modulator. If necessary, connect the HDMI OUT to a TV using an HDMI
cable. The RF output must be connected to your coaxial cable distribution. Connect the
input RF IN to your terrestrial antenna or your terrestrial TV socket. If the RF IN connector
is not used, you must connect a 75 Ω type F load. Connect the jack of the external power
supply to the input DC 12V of the modulator and finally connect the power supply to a
power socket.

5 Modulator operation and configuration

Some second after power on the modulator, in the display appear the firmware version. In the
next picture show the version 3.16 in the display.
Reserved for technical modifications and/or errors
User's manual · MODIG S
Example of connection
6
- -
MODIG S Version en_1.1 Fte maximal