Content Of The Box; Description; Connections - FTE Maximal MODIG S Manuel De L'utilisateur

2 Content of the box

When you open the box or the first time, you will find the following content:
1. Modulator
2. Power supply 12Vdc-2A
3. User's manual

3 Description

This device allow connect in the HDMI input the Audio/video signal HD from a satellite
receiver, a surveillance system or other equipment with HDMI output compatible and
modulate in DVB-T in his RF Output to send to a coaxial distribution to see in several TV.
The modulator has a RF input to mix the signal of the terrestrial aerial received with the
output DVB-T channel in the RF output. It has a loop HDMI output to connect a TV using
a HDMI cable.

3.1 Connections

1. Ground:
2. DC 12V:
3. HDMI IN:
4. HDMI OUT: HDMI output to connect a nearby TV via HDMI.
5. USB:
6. RF OUT:
7. RF IN:
8. DISPLAY:
9. LEDS indicators:
a. POWER: When this led is on the device has power..
b. HD: This led is on when the modulator has A/V signal in HDMI IN.
c. MODE: This led is on when the user is editing the settings of the modulator.
10. KEYBOARD: The button of the keyboard is used to change the settings of the
modulator.
a. OK. Press this button to enable the operation mode to edit the settings or
confirm the new value of the parameter.
Reserved for technical modifications and/or errors
User's manual · MODIG S
1 2 3 4
Ground connector.
12Vdc connection (Power Supply).
HD A/V input.
USB port used to upgrade the device.
RF output of the modulator.
RF input of the modulator.
Show the parameter of the modulator.
5 6 7
10
5
- -
8
9
MODIG S Version en_1.1 Fte maximal