Extractor Version - IKEA LI25RA Manuel D'utilisation Et D'entretien

The hood is designed for use in "Extractor version" or in
"Filter version"

Extractor version

(see symbol in installation handbook)
fumes are extracted and expelled to the outside through a
fumes exhaust hose (not supplied) fixed to the collar of the
hood.
In accordance with the exhaust hose purchased, provide a
suitable fixing system to secure it to the collar.
Warning: If already installed, remove the carbon filter/s.
Filter version
(see symbol in installation handbook)
Air is filtered through a carbon filter/s and recycled into the
surrounding environment.
Warning: check that air recirculation is facilitated (to this end,
carefully follow the instructions given in the installation
handbook)
Warning! If the hood does not have a carbon filter/s, order
one/them and fit it/them before use.
The hood comes provided with hardware (e.g.: screws and/or
plugs) suitable for most walls/ceilings. However, it is necessary
to contact a qualified technician to ensure suitability according
to the type of wall/ceiling. The wall/ceiling must be strong
enough to take the weight of the hood.
Very heavy product; hood handling and installation
must be carried out by at least two persons.
5019 618 33093/A LI25RA
GB
D F I